Razorweld Razorcut 45
The RAZORCUT45 is an inverter-based Plasma cutting machine produced using the latest in IGBT technology. This machine is reliable, robust and stacked with features that you can expect from a quality Plasma Cutter.
The RAZORCUT45 produces a high-temperature plasma stream providing effortless cutting of all electrically conductive materials including steel, cast iron, stainless steel, copper & aluminum brass. The RAZORCUT45 is equipped with a high-quality J45XC-6 Plasma torch with Euro connection, developed specifically to enhance and improve the cut quality of the RAZORCUT45 machine.
The connection of the J45XC-6 Plasma torch provides effortless starting of the cut with powerful, fast and accurate cutting capability, additional is the benefit of longer life cycle consumable electrodes and cutting tips. The RAZORCUT45 is an exceptional machine that is suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services.
The RAZORCUT45 is packaged with a tough J45XC-6 Plasma torch, earth lead and air regulator. The RAZORCUT45 gives you the best of both worlds great portability, with the power to get the job done.
Built to our specification and manufactured and approved to CSA/CAN 60974-1
-
- Razor Cut 45 Power Source
- 19 foot J45XC-6 Plasma Torch
- Heavy duty earth clamp
- Instruction Manual -
- Latest IGBT Inverter Technology
- Safe Euro torch connection
- High-quality TRF45 Plasma Torch
- Industrial application
- Tolerant to variable power supply
- In-built Air Regulator with preset air pressure
- Suitable to cut all electrically conductive materials
- Lightweight and compact
- Strong metal housing, with plastic front and rear covers
- Generator use with pure sine wave generator only -
Part Number - JRWPC45LXC
Power Supply / Phases (V-Ph) - 230v - 1 +/- 15%
Duty Cycle @ 40°c - 30% @ 45Amps
Rated Power (KVA) - 6.5
imax (A) - 29.2
ieff (A) - 15
Output Current Range (A) Plasma - 20-45
Rated Output Voltage (V) - 98
Insulation Class - F
Protection Class - IP21S
Plasma Arc Starting - Pilot L/F
Air Flow Pressure (MPA) - 0.5 (75 psi) (6 CFM)
Air Flow Rate l/min - 189
Cutting Thickness - Clean (in) - 1/2 Mild steel
Cutting Thickness - Severance (in) - 3/4 Mild steel
Dimensions (in) - 16 x 6.5 x 13
Weight (lbs) - 22
Approved to - CSA/CAN 60974-1
Providing the region’s most responsive customer service along with convenient locations and the best products is our goal. If you have any issues or questions, please contact your nearest location or fill out the form below and we will reach out to you.