Miller Multimatic 215 PRO
The Miller Multimatic 215 PRO with Auto-Set is a multi-voltage, 230 amp portable multiprocess welder that is capable of MIG, stick and DC TIG welding. It comes complete with a 15 ft. MDX-100 MIG gun and stick electrode holder with cable. The Multimatic 215 PRO has a higher duty cycle, draws less power and has a superior welding arc, compared to other welders in its class. Weighing in at only 35 pounds, the Multimatic 215 PRO is capable of MIG and stick welding mild steel up to 3/8 inch thick. It can also DC TIG weld up to 1/4 inch thick steel with an OPTIONAL TIG torch.
Want more details or a quote? Contact us below!
The Multimatic 215 PRO features Auto-Set, which eliminates the guesswork of setting welding parameters. While the welder is in Auto-Set mode, simply select the material thickness and electrode diameter you're using, and you're ready to weld. The Auto-Set control automatically sets your welder to the proper welding output. It is available when welding mild steel and can be used with solid MIG wire, flux-cored wire, stick electrode or tungsten electrode. Auto-Set can also be used when welding stainless steel or MIG welding aluminum with OPTIONAL spool gun. Auto-Set also allows for the use of several different shielding gases, including CO2, Argon and Argon/CO2 C25 mix. Manual welding control is also available for those welders who wish to fine tune their welding arc. The parameter door chart lists voltage and amperage setting options.
The Multimatic 215 PRO operates on 120 volt or 240 volt input power. The included Multi-Voltage plugs allow you to switch between 120 and 240 volts without manual linking. Auto Spool Gun Detect automatically detects when an OPTIONAL Spoolmate spool gun is attached, for seamless transitions to aluminum MIG welding. The 14-pin front panel receptacle allows for the connection of OPTIONAL Miller industrial remote amperage foot and figertip controls. The 215 PRO comes complete with 15 ft. MDX-100 MIG gun, 15 ft. work cable with clamp, electrode holder with cable, 6.5 ft. input power cord with MVP plugs for 120 and 240 volts, flow gauge regulator and gas hose, two contact tips for .030 in. wire, Quick Select drive rolls for .024 in. or .030/.035 in. solid wire, and .030/.035 in. flux-cored wire, PLUS Miller's True Blue 3-year warranty.