ESAB EM 210 MIG 200A

- EM 210 Power Source (MIG Only)
- Fusion 180 MIG Gun (Accepts Velocity Consumables)
- Tweco 17V TIG Torch with 50 mm Dinse and Accessory Kit
- Tweco Electrode Holder
- Ground Clamp
- Argon/CO2 Regulator with Gas Hose
- 115V/230V Power Adapter
- 2 lb Spool of 70S6 Wire
- 024/.030 and .030/.035 Drive Rolls

- The EM 210 is a MIG/Flux Cored welding system with a 30-200A output; welds material from 22 gauge up to 3/8-inch in a single pass; accepts 4- and 8-inch diameter wire spools.

- Comes spool gun-ready for MIG aluminum with optional spool gun (spool gun sold separately)

- Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.

- Improve welding results with advanced functions typically found on industrial machines: MIG wire run- in, burn-back, variable inductance, 2T/4T trigger control.

- Portability and flexibility to weld in a variety of locations. Weighing only 29 lbs, connect to 120/230V primary power and compatible with 10kVa generators.

Voltage - 115/230 V , 50/60 Hz
MIG (GMAW) Welding Output
- 90 A / 18.5 V (115V) @ 40 % Duty Cycle
- 57 A / 16.9 V (115V) @ 100 % Duty Cycle
- 200 A / 24 V (230V) @ 15 % Duty Cycle
- 77 A / 17.9 V (230V) @ 100 % Duty Cycle
Current Range - 30-200 A
Voltage Range
- 12-20 V
- 12-24 V
Wire Feeder Specifications - 2-11 m/min ( 80-450 in./min )
Open Circuit Voltage - 68 VDC
Aluminum - 0.8-0.9 mm ( .030-.035 in. )
Cored Wire - 0.8-0.9 mm ( .030-.035 in. )
Stainless Steel - 0.6-0.8 mm ( .024-.030 in. )
Mild Steel - 0.6-0.8 mm ( .024-.030 in. )
Max Spool Diameter - 100 & 200 mm ( 4 & 8 in. )
Standards - CSA
Protection Class - IP21S
Supply Plug - 14 A WG NEMA 5-20P, 3 m (10 ft) rubber
Dimensions, L x W x H - 487 x 221 x 381 mm ( 19.2 x 8.7 x 15 in. )
Weight - 13 kg ( 28.7 lbs )