ESAB EMP 210 200A w/TIG

- Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10 –200A output. Stable Lift TIG arc at low amperage for total control; power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation

- Improve welding results with advanced functions typically found on industrial machines: MIG wire run-in, burn-back, variable inductance, 2T/4T trigger control, Lift TIG arc starts, gas pre and post-flow, Stick hot start and arc force control

- Portability and flexibility to weld in a variety of locations. Both units weigh just under 29 lbs, connect to 120/230V primary power,

Voltage - 115/230 V , 50/60 Hz
Lift TIG (GTAW) Welding Output
- 90 A / 13.6 V (115V) @ 40 % Duty Cycle
- 57 A / 12.3 V (115V) @ 100 % Duty Cycle
- 200 A / 18 V (230V) @ 15 % Duty Cycle
- 77 A / 13.1 V (230V) @ 100 % Duty Cycle
MIG (GMAW) Welding Output
- 90 A / 18.5 V (115V) @ 40 % Duty Cycle
- 57 A / 16.9 V (115V) @ 100 % Duty Cycle
- 200 A / 24 V (230V) @ 15 % Duty Cycle
- 77 A / 17.9 V (230V) @ 100 % Duty Cycle
STICK (SMAW) Welding Output
- 70 A / 22.8 V (115V) @ 40 % Duty Cycle
- 44 A / 21.8 V (115V) @ 100 % Duty Cycle
- 170 A / 26.8 V (230V) @ 20 % Duty Cycle
- 66 A / 22.6 V (230V) @ 100 % Duty Cycle
Current Range - 10-200 A
Voltage Range
- 12-24 V
- 12-20 V
Wire Feeder Specifications - 2-11 m/min ( 80-450 in./min )
Open Circuit Voltage - 68 VDC
Aluminum - 0.8-0.9 mm ( .030-.035 in. )
Cored Wire - 0.8-0.9 mm ( .030-.035 in. )
Stainless Steel - 0.6-0.8 mm ( .024-.030 in. )
Mild Steel - 0.6-0.8 mm ( .024-.030 in. )
Max Spool Diameter - 100 & 200 mm ( 4 & 8 in. )
Standards - CSA
Protection Class - IP21S
Supply Plug - 14 A WG NEMA 5-20P, 3 m (10 ft) rubber
Dimensions, L x W x H - 487 x 221 x 381 mm ( 19.2 x 8.7 x 15 in. )
Weight - 13 kg ( 28.7 lbs )