Hobart Handler 140 MIG Welder

Self-resetting motor protection -
Protects wire feed system from overload, you won't need to change or reset the circuit breaker.

Arc Performance -
Smooth, stable arc on all thicknesses allows you the best arc possible.

Industrial cast aluminum wire drive system -
Durable wire feed provides you professional performance.

Five-position voltage control -
Five voltage ranges allow you to fine-tune the arc.

Quick Select drive roll -
Less of your time consumed in setup by offering three grooves - two for different size solid wire and a third for flux-cored wire.

Weighs only 57 pounds -
Easier to transport: increased ability to weld where you need to weld.

Convenient polarity changeover -
Easier and quicker for you to change polarity between solid or tubular wire.

Sloped control panel -
Increased visibility so you can make adjustments more easily.

Self resetting thermal overload protection -
Protects power transformer from thermal overload to provide you maximum reliability.

Processes - Flux Cored (FCAW), MIG (GMAW)
Industries Interests - Auto Repair, DIY / Home Hobbyist, Farm and Ranch, Maintenance and Repair - Field Operations
Amperage - 25A - 140A
Material Thickness - Mild Steel 24 ga. (0.5 mm) - 1/4 in. (6.4 mm)
Weldable Metals - Aluminum, Stainless Steel, Steel
Input Voltage - 110/115/120 V
Input Phase - 1-Phase
Input Hz - 60 Hz
Current Type - DC
Rated Output - 90 A @ 20% duty cycle
Max Open Circuit Voltage - 28 VDC
Wire Feed Speed - 40 IPM - 700 IPM
Wire Diameter - Stainless 0.024 in. - 0.035 in., Stainless 0.6 mm. - 0.9 mm., Solid Steel 0.6 mm. - 0.9 mm., Solid Steel 0.024 in. - 0.035 in., Flux Cored 0.03 in. - 0.035 in., Flux Cored 0.8 mm. - 0.9 mm.
Portability - Handle(s)
Weld Output - CV
Net Width - 10.625 in
Net Height - 12.375 in
Net Length - 19.5 in
Net Weight - 57 lbs
Warranty - 3 Years Hobart Warranty