Miller Millermatic 211 PRO MIG Welder

$0.00

With a host of new technologies to make it last longer, do more and always stay up to date, the Millermatic 211 PRO has enough grit to match the people who use it.

With a host of new technologies to make it last longer, do more and always stay up to date, the Millermatic 211 PRO has enough grit to match the people who use it.

 
Equipment Repair
Download Spec Sheet
Equipment Rental
 

  • - Power source
    - 15 ft. (4.6 m) MDX™-100 MIG gun
    - 15 ft. (4.6 m) work cable with clamp
    - 6.5 ft. (2 m) power cord with MVP™ plugs for 120 V and 240 V
    - Flow gauge regulator and gas hose for argon or AR/CO2 mix
    - Two contact tips for .030 in. (0.8 mm) wire
    - Quick Select™ drive rolls for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
    - Material thickness gauge 229895
    - Hook-and-loop cord wraps

  • Auto-Set -
    •Fast and easy predefined settings for multiple materials and processes to help you get welding quickly.
    •Wire/gas combinations include Flux Cored, Mild Steel with 100% CO2, Mild Steel with C25, Stainless Steel, and Aluminum with spool gun
    •Select the weld process and gas being used
    •Select the wire diameter (.024, .030 or .035 in.)
    •Select the material thickness you’re welding
    •Start welding with the exact parameters you need!

    Smooth-Start -
    Provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category.

    Multi-voltage plug (MVP) -
    Allows connection to common 120- and 240- volt power receptacles without the use of any tools — simply choose the plug that fits the receptacle and connect to the power cord.

    Angled cast-aluminum drive system -
    With calibrated tension knob creates consistent feeding and easy setup.

    Quick Select-
    Drive roll makes setup quicker by offering three grooves—two for different size solid wire and a third for flux-cored wire.

    Continually upgradeable -
    USB enabled software allows expandable machine capabilities without requiring mechanical modifications. This ensures the investment continues to produce over time, even as needs evolve.

    Auto Spool Gun Detect -
    Automatically detects when a MIG gun or spool gun is connected, eliminating the need for a switch.

    Fan-On-Demand -
    Cooling system only operates when needed, reducing noise, energy use and contaminants pulled though the machine.

    Uses 4- or 8-inch (102 or 203 mm) spools -
    Can be set up to weld with .024–.035 inch (0.6–0.9 mm) solid wire and .030–.045 inch (0.8–1.2 mm) flux-cored wire.

Providing the region’s most responsive customer service along with convenient locations and the best products is our goal. If you have any issues or questions, please contact your nearest location or fill out the form below and we will reach out to you.